Publikationen des Jahres 2008

Monografien (1)

1. R. Dahlhaus, J. Kurths, P. Maaß, J. Timmer (Hrsg.).
   Mathematical Methods in Time Series Analysis and Digital Image Processing.
   Understanding Complex Systems, 294 Seiten, Springer Verlag, 2008.

Zeitschriftenartikel (40)

1. F. Alexandrov, N. Golyandina, A. Spirov.
   Singular Spectrum Analysis of gene expression profiles of early Drosophila embryo: exponential-in-distance patterns.
   Research Letters in Signal Processing, Article ID 825758, 5 S., 2008.
2. T. Arens, D. Gintides, A. Lechleiter.
   Variational formulations for scattering in a 3-dimensional acoustic waveguide.
   Mathematical Methods in the Applied Sciences, 31:821-847, WILEY-VCH, 2008.

   DOI: 10.1002/mma.947
   online unter: http://onlinelibrary.wiley.com/doi/10.1002/mma.947/abstract

3. H. Blum, T. Jansen, A. Rademacher, K. Weinert.
   Finite elements in space and time for dynamic contact problems.
   International Journal on Numerical Methods in Engineering, 76:1632-1644, 2008.
4. H. Blum, A. Rademacher, A. Schröder.
   Space adaptive finite element methods for dynamic obstacle problems.
   Electronic Transactions on Numerical Analysis, 32:162-172, 2008.
5. M. Böhm, S. Meier, M. Peter.
   Was zerstört Stahlbeton-Brücken? - Wie Mathematiker mit Mehrskalenmethoden zur Materialforschung beitragen.
   Praxis der Mathematik in der Schule, 20:39-43, 2008.
6. C. Brandt, J. Niebsch, R. Ramlau, A. Krause, O. Riemer, P. Maaß.
   Process Machine Interaction Model for Turning Processes.
   International Journal of Control Theory and Applications, 1(2):145-153, 2008.
7. K. Bredies, D. Lorenz.
   Iterated hard shrinkage for minimization problems with sparsity constraints.
   SIAM Journal on Scientific Computing, 30(2):657-683, 2008.
8. K. Bredies, D. Lorenz.
   Linear Convergence of iterative soft-thresholding.
   Journal of Fourier Analysis and Applications, 14(5):813-837, Springer Verlag, 2008.

   DOI: 10.1007/s00041-008-9041-1

9. K. Bredies, D. Lorenz.
   On the convergence speed of iterative methods for linear inverse problems with sparsity constraints.
   Journal of Physics, Conference Series, 124(1):2031-2043, 2008.
10. S. Dahlke, G. Kutyniok, P. Maaß, C. Sagiv, H. Stark, G. Teschke.
    The uncertainty principle associated with the continuous shearlet transform.
    International Journal of Wavelets, Multiresolution and Information Processing, 6(2):157-181, 2008.

    DOI: 10.1142/S021969130800229X

11. S. Dahlke, D. Lorenz, P. Maaß, C. Sagiv, G. Teschke.
    The Canonical Coherent States Associated With Quotients of the Affine Weyl-Heisenberg Group.
    Journal of Applied Functional Analysis, 3(2):215-232, 2008.
12. A. Hinrichs, M. Piotrowski.
    On the degree of compactness of embeddings between weighted modulation spaces.
    , 6(3):303-317, 2008.
13. P. Maaß.
    A convex optimization approach to robust observer-based H∞ control design of linear parameter-varying delayed systems.
    International Journal of Modelling, Identification and Control, 4(3):226-241, 2008.

    DOI: 10.1504/IJMIC.2008.021160

14. K. Kazimierski.
    Adaptive Mann iterations for nonlinear accretive and pseudocontractive operator equations.
    Mathematical Communications, 13(1):33-44, 2008.
15. A. S. Lawless, N. Nichols, C. Böß, A. Bunse-Gerstner.
    Approximate Gauss-Newton methods for optimal state estimation using reduced order models.
    International Journal for Numerical Methods in Fluids, 56(8), 1367–1373, 2008.

    DOI: 10.1002/fld.1629

16. A. S. Lawless, N. Nichols, C. Böß, A. Bunse-Gerstner.
    Using model reduction methods within four-dimensional variational data-assimilation.
    Monthly Weather Review, 136, 1511–1522, AMS - American Meteorological Society, 2008.

    DOI: 10.1175/2007MWR2103.1

17. A. Lechleiter, N. Hyvönen, H. Hakula.
    The factorization method applied to the complete electrode model of impedance tomography.
    SIAM Journal on Applied Mathematics, 68:1097-1121, 2008.

    DOI: 10.1137/070683295
    online unter: http://dx.doi.org/10.1137/070683295

18. A. Lechleiter, A. Rieder.
    Newton regularizations for impedance tomography: convergence by local injectivity.
    Inverse Problems, 24, 065009, IOPscience, 2008.

    DOI: 10.1088/0266-5611/24/6/065009
    online unter: http://iopscience.iop.org/0266-5611/24/6/065009

19. D. Lorenz.
    Convergence rates and source conditions for Tikhonov regularization with sparsity constraints.
    Journal of Inverse and Ill-posed Problems, 16(5):463-478, 2008.

    DOI: 10.1515/JIIP.2008.025
    online unter: http://dx.doi.org/10.1515/JIIP.2008.025

20. D. Lorenz, R. Griesse.
    A semismooth Newton method for Tikhonov functionals with sparsity constraints.
    Inverse Problems, 24(3), 035007, 2008.

    DOI: 10.1088/0266-5611/24/3/035007
    online unter: http://dx.doi.org/10.1088/0266-5611/24/3/035007

21. D. Lorenz, D. Trede.
    Optimal Convergence Rates for Tikhonov Regularization in Besov Scales.
    Inverse Problems, 24(5), 055010(14pp), 2008.

    DOI: 10.1088/0266-5611/24/5/055010
    online unter: arXiv.org e-Print archive

22. I. Loresch, H. Schulte, O. Riemer, P. Maaß, F. Dollinger.
    Mathematische Ansätze zur Materialabtragsmodellierung beim Polieren.
    HTM - Journal of Heat Treatment and Materials, 63(5):252-256, 2008.

    DOI: 10.3139/105.100472

23. P. Maaß, B. Kuhfuß, O. Riemer.
    Mathematical Models for surface characterization of machining processes.
    Microsystem Technologies, 14(12):1989-1993, Springer Verlag, 2008.

    DOI: 10.1007/s00542-008-0687-z

24. S. Meier.
    A homogenisation-based two-scale model for reactive transport in media with evolving microstructure.
    Comptes Rendus Mecanique, 336(8):623-628, Elsevier, 2008.
25. S. Meier, A. Muntean.
    A two-scale reaction-diffusion system with micro-cell reaction concentrated on a free boundary.
    Comptes Rendus Mecanique, 336(6):481-486, Elsevier, 2008.
26. A. Muntean.
    Error bounds on semi-discrete finite element approximations of a moving-boundary system arising in concrete corrosison.
    International Journal of Numerical Analysis and Modeling, 5(3):363-372, 2008.
27. M. Peter, M. Böhm.
    Different choices of scaling in homogenization of diffusion and interfacial exchange in a porous medium.
    Mathematical Methods in the Applied Sciences, 31(11):1257-1282, 2008.
28. M. Peter, A. Muntean, S. Meier, M. Böhm.
    Competition of several carbonation reactions in concrete: A parametric study.
    Cement and Concrete Research, 38(12):1385-1393, 2008.
29. M. Pidcock, P. Maaß, C. Sebu.
    A mollifier method for the inverse conductivity problem.
    Journal of Physics, Conference Series, Article ID 012068 135(1), 2008.

    DOI: 10.1088/1742-6596/135/1/012068

30. D. D. Haroske.
    Atomic decomposition of function spaces with Muckenhoupt weights; an example from fractal geometry.
    Mathematische Nachrichten, 281(10), 1476–1494, 2008.
31. .
    Entropy and aproximation numbers of embeddings between weighted besov spaces.
    Banach Center Publications, 79:173-185, 2008.
32. L. Prünte, P. Maaß, H. Thielemann.
    Condition Monitoring of linear guideways using a matched wavelet approach.
    Signal Processing, 88(7):1656-1670, Elsevier, 2008.

    DOI: 10.1016/j.sigpro.2007.12.017

33. B. Salimbahrami, B. Lohmann, A. Bunse-Gerstner.
    Passive reduced order modelling of second-order systmes.
    Mathematical and Computer Modelling of Dynamical Systems, 14(5):407 - 420, 2008.
34. B. Scholz-Reiter, F. Wirth, S. Dashkovskiy, T. Jagalski, T. Makuschewitz.
    Analyse der Dynamik großskaliger Netzwerke in der Logistik.
    Industrie Management, 24(3):37-40, 2008.
35. B. Scholz-Reiter, F. Wirth, S. Dashkovskiy, T. Jagalski, T. Makuschewitz.
    Die Dynamik komplexer Supply Chains.
    EML Einkauf, Materialwirtschaft, Logistik, 48(9):10-13, 2008.
36. T. Schuster, P. Maaß, T. Bonesky, K. Kazimierski, F. Schöpfer.
    Minimization of Tikhonov Functionals in Banach Spaces.
    Abstract and Applied Analysis, Article ID 192679, 2008, 18 pages, 2008.

    DOI: 10.1155/2008/192679

37. M. Wolff, M. Böhm, F. Frerichs.
    Dimensional analysis of a model problem in thermoelasto-plasticity for cylindrical bodies under heating and cooling.
    ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, 88(10):758-775, 2008.
38. M. Wolff, M. Böhm, M. Dalgic, I. Hüßler.
    Evaluation of models for TRIP and stress-dependent transformation behaviour for the martensitic transformation of the steel 100Cr6.
    Computational Materials Science, 43:108-114, 2008.
39. M. Wolff, M. Böhm, D. Helm.
    Material behavior of steel – Modeling of complex phenomena and thermodynamic consistency.
    International Journal of Plasticity, 24:746-774, 2008.
40. M. Wolff, L. Taleb.
    Consistency for two multi-mechanism models in isothermal plasticity .
    International Journal of Plasticity, 24:2059-2083, Elsevier, 2008.

    DOI: 10.1016/j.ijplas.2008.03.001
    online unter: http://www.sciencedirect.com/science/article/pii/S0749641908000375#

Tagungsbeiträge (29)

1. Z. Akbay, J. Montalvo Urquizo, T. Pretorius, F. Vollertsen.
   Fast FEM-Model and Keyhole-Heat Source Model for Self-Optimized Simulation of Laser Welding Processes.
   International Workshop on Thermal Forming and Welding, 22.04.-23.04.2008, Bremen, Deutschland.
   Thermal Forming and Welding Distortion, Proceedings of the IWOTE'08, F. Vollertsen, J. Sakkiettibutra (Hrsg.), S. 277-288, 2008.
2. F. Alexandrov.
   A method of trend extraction using Singular Spectrum Analysis.
   International Conference on Computational Statistics, 24.08-29.08.2008, Porto, Portugal.
   Erscheint in Proceedings of COMPSTAT'08.
3. F. Alexandrov, N. Golyandina, A. Timofeyev.
   Dependence of accuracy of ESPRIT estimates on signal eigenvalues: the case of a noisy sum of two real exponentials.
   79th Annual Meeting of the International Association of Applied Mathematics and Mechanics, 31.03-04.04.2008, Bremen, Deutschland.
   Proceedings in Applied Mathematics and Mechanics, 8(1):10761–10762, 2008.

   DOI: 10.1002/pamm.200810761

4. D. Biermann, H. Blum, T. Jansen, A. Rademacher, A. Scheidler, K. Weinert.
   Experimental analyses to develop models for NC-shape grinding with a toroid grinding wheel.
   1st CIRP International Conference on Process Machine Interactions (PMI), Produktionstechnisches Zentrum, Garbsen.
   
5. D. Biermann, H. Blum, T. Jansen, A. Rademacher, A. Scheidler, A. Schröder, K. Weinert.
   Space adaptive finite element methods for dynamic Signorini problems in the simulation of the NC-shape grinding process.
   1st CIRP International Conference on Process Machine Interactions (PMI), Produktionstechnisches Zentrum, Garbsen.
   
6. B. Blume, C. Büskens.
   Optimal Control for indoor overhead crane systems with predefined course of crab.
   79th Annual Meeting of the International Association of Applied Mathematics and Mechanics, 31.03-04.04.2008, Bremen, Deutschland.
   Proceedings in Applied Mathematics and Mechanics, 8(1):10107-10108, 2008.

   DOI: 10.1002/pamm.200810107

7. M. Böhm, A. Muntean, A. Schmidt.
   On the motion of internal carbonation layers.
   Abschlusskolloquium des DFG Schwerpunktprogramms 1122, 21.02.-22.02.2008, Hamburg, Deutschland.
   Erscheint in Prediction of time dependent damage due to physical-technical processes in mineral building materials, Proceedings of Abschlusskolloquium DFG SPP 1122.
8. C. Brandt, J. Niebsch, R. Ramlau, A. Krause, O. Riemer, P. Maaß.
   Process-Machine Interaction Model for Turning Process.
   The 1st International Conference on Process Machine Interactions, 03.09-04.09.2008, Leibniz Universität Hannover, Deutschland.
   Proceedings of the 1st International Conference on Process Machine Interactions, S. 239-246, 2008.
9. K. Bredies.
   An iterative thresholding-like algorithm for inverse problems with sparsity constraints in Banach space.
   4th International Conference on Inverse Problems: Modeling and Simulation, 26.05.-30.05.2008, Fethiye, Türkei.
   Erscheint in Journal of Inverse and Ill-Posed Problems.
10. K. Bredies, F. Alexandrov, J. Decker, D. Lorenz, H. Thiele.
    Sparse deconvolution for peak picking and ion charge estimation in mass spectrometry.
    15th European Conference on Mathematics in Industry'08, 30.06.-04.07.2008, London, Großbritannien.
    Erscheint in Proceedings of 15th European Conference on Mathematics in Industry'08.
11. S. Dashkovskiy, B. Rüffer, F. Wirth.
    Application of small gain type theorems in logistics of autonomous processes.
    1st International Conference on Dynamics in Logistics, 28.08.-30.08.2007, Bremen, Deutschland.
    Proceedings of the 1st International Conference on Dynamics in Logistics, S. 359-366, Springer Verlag, 2008.

    online unter: http://www.springer.com/cda/content/document/cda_downloaddocument/9783540768616-t1.pdf?SGWID=0-0-45-533901-p173798526

12. S. Dashkovskiy, B. Rüffer, F. Wirth.
    Applications of the general Lyapunov ISS small-gain theorem for networks.
    47th IEEE Conference on Decision and Control, 12.12.-14.12.2008, Cancún, Mexiko.
    Proceedings of the 47th IEEE Conference on Decision and Control, S. 25-30, 2008.

    online unter: http://www.math.uni-bremen.de/~dsn/Publications/2008-CDC-DRW-applications.pdf

13. S. Dashkovskiy, B. Rüffer, F. Wirth.
    Stability of autonomous vehicle formations using an ISS small-gain theorem for networks.
    79th Annual Meeting of the International Association of Applied Mathematics and Mechanics, 31.03-04.04.2008, Bremen, Deutschland.
    Proceedings in Applied Mathematics and Mechanics, 8(1):10911-10912, 2008.

    online unter: http://www.math.uni-bremen.de/~dsn/Publications/2008-PAMM-DRW-Formations.pdf

14. S. Dashkovskiy, B. Rüffer, F. Wirth.
    Stability of interconnections of ISS systems.
    SICE 8th Annual Conference on Control Systems, 05.03.-07.03.2008, Kyoto, Japan.
    Proceedings of the 8th Annual Conference on Control Systems, S. 52431-52434, 2008.
15. A. Decker, P. Maaß, D. H. Müller, A. Pehlken, M. Rolbiecki, K. D. Thoben, S. Todt, W. Wosniok.
    Unsicherheitsanalyse des Aufbereitungsprozesses am Beispiel Altreifenrecycling.
    Aufbereitung und Recycling 2008, 12.11.-13.11.2008, Freiberg, Deutschland.
    Erscheint in Tagungskompendium Aufbereitung und Recycling 2008.
16. D. Lorenz, K. Bredies.
    Iterated hard-thresholding for linear inverse prob- lems with sparsity constraints.
    PAMM.
    Proceedings in Applied Mathematics and Mechanics, S. 2060061-2060062, 2008.
17. D. Lorenz, P. Maaß, H. Preckel, D. Trede.
    Topology-preserving geodesic active contours for segmentation of high-content fluorescent cellular imaging.
    79th Annual Meeting of the International Association of Applied Mathematics and Mechanics, 31.03-04.04.2008, Bremen, Deutschland.
    Proceedings in Applied Mathematics and Mechanics, 8(1):10941-10942, 2008.

    DOI: 10.1002/pamm.200810941

18. I. Loresch, H. Schulte, O. Riemer, E. Brinksmeier, P. Maaß, F. Dollinger.
    Mathematical Approaches for the Modelling of Material Removal in Polishing Processes.
    The 1st International Conference on NanoManufacturing, 13.07.-16.07.2008, Singapur, .
    Erscheint in Proceedings of the 1st International Conference on NanoManufacturing.
19. S. Meier, M. Peter, A. Muntean, M. Böhm, J. Kropp.
    A two-scale approach to concrete carbonation.
    International RILEM Workshop on Integral Service Life Modelling of Concrete Structures, 05.11.-06.11.2007, Guimarães, Portugal.
    RILEM Proceedings PRO 56: International RILEM Workshop on Integral Service Life Modelling of Concrete Structures, R. M. Ferreira, J. Gulikers, C. Andrade (Hrsg.), S. 3-10, 2008.
20. A. Muntean, M. Böhm, S. Meier.
    A moving-boundary model with Stefan-Signorini conditions to predict service life of concrete structures.
    International RILEM Workshop on Integral Service Life Modelling of Concrete Structures, 05.11.-06.11.2007, Guimarães, Portugal.
    RILEM Proceedings PRO 56: International RILEM Workshop on Integral Service Life Modelling of Concrete Structures, R. M. Ferreira, J. Gulikers, C. Andrade (Hrsg.), S. 55-62, 2008.
21. T. Nikolayzik, C. Büskens.
    A sub-feasible correction step for non-linear programming methods with equality constraints.
    79th Annual Meeting of the International Association of Applied Mathematics and Mechanics, 31.03-04.04.2008, Bremen, Deutschland.
    Proceedings in Applied Mathematics and Mechanics, 8(1):10779–10780, 2008.

    DOI: 10.1002/pamm.200810779

22. C. Brandt, P. Maaß.
    Model development for turning process.
    6th International Conference on Manufacturing Research, 09.09.-11.09.2008, Brunel University, West London, Großbritannien.
    Proceedings of the 6th International Conference on Manufacturing Research, S. 859-866, 2008.
23. R. Stach, C. Büskens, J. Tietjen.
    Advanced Optimal Feedback Control for Tracking of Real-Life Applications.
    79th Annual Meeting of the International Association of Applied Mathematics and Mechanics, 31.03-04.04.2008, Bremen, Deutschland.
    Proceedings in Applied Mathematics and Mechanics, 8(1):10867–10868, 2008.

    DOI: 10.1002/pamm.200810867

24. B. Suhr, F. Frerichs, I. Hüßler, M. Wolff.
    Evaluation of models for martensitic transformation and TRIP via comparison of experiments and simulations.
    2nd International Conference on Distortion Engineering, 17.09.-19.09.2008, Bremen, Deutschland.
    Proceedings of the 2nd International Conference on Distortion Engineering, T. Lübben, H. Zoch (Hrsg.), S. 421-429, 2008.
25. H. Tiesler, C. Büskens, T. Preusser.
    Parameter Identification in Radio Frequency Ablation.
    79th Annual Meeting of the International Association of Applied Mathematics and Mechanics, 31.03-04.04.2008, Bremen, Deutschland.
    Proceedings in Applied Mathematics and Mechanics, 8(1):10869–10870, 2008.

    DOI: 10.1002/pamm.200810869

26. J. Tietjen, C. Büskens, M. Knauer.
    Time Schedule Optimization of Satellites.
    79th Annual Meeting of the International Association of Applied Mathematics and Mechanics, 31.03-04.04.2008, Bremen, Deutschland.
    Proceedings in Applied Mathematics and Mechanics, 8(1):10805–10806, 2008.

    DOI: 10.1002/pamm.200810805

27. J. Vogelsang, C. Büskens.
    Optimal Control of Long Cable Crane Systems.
    79th Annual Meeting of the International Association of Applied Mathematics and Mechanics, 31.03-04.04.2008, Bremen, Deutschland.
    Proceedings in Applied Mathematics and Mechanics, 8(1):10151–10152, 2008.

    DOI: 10.1002/pamm.200810151

28. T. Wandmacher, E. Ovchinnikova, F. Alexandrov.
    Does latent semantic analysis reflect human associations?
    20th European Summer School in Logic, Language and Information, 04.08.-15.08.2008, Hamburg, Deutschland.
    Proceedings of the 20th European Summer School in Logic, Language and Information, M. Baroni, S. Evart, A. Lenci (Hrsg.), S. 63-70, 2008.
29. M. Wolff, M. Böhm, B. Suhr.
    Comparison of different approaches to transformation-induced plasticity in steel.
    2nd International Conference on Distortion Engineering, 17.09.-19.09.2008, Bremen, Deutschland.
    Proceedings of the 2nd International Conference on Distortion Engineering, T. Lübben, H. Zoch (Hrsg.), S. 401-409, 2008.

Buchkapitel (2)

1. G. J. Bauer, D. Lorenz, P. Maaß, H. Preckel, D. Trede.
   Wirkstoffe, Medikamente und mathematische Bildverarbeitung.
   Produktionsfaktor Mathematik - wie Mathematik Technik und Wirtschaft bewegt, M. Grötschel, K. Lucas, V. Mehrmann (Hrsg.), acatech DISKUTIERT, S. 461-477, acatech - Deutsche Akademie der Technikwissenschaften, 2008.

   DOI: 10.1007/978-3-540-89435-3_20

2. S. Dahlke, P. Maaß, G. Teschke, K. Koch, D. Lorenz, S. Müller, S. Schiffler, A. Stämpfli, H. Thiele, M. Werner.
   Multiscale Approximation.
   Mathematical Methods in Time Series Analysis and Digital Image Processing, R. Dahlhaus, J. Kurths, P. Maaß, J. Timmer (Hrsg.), S. 75-109, Springer Verlag, 2008.

Qualifikationsarbeiten (7)

1. C. Böß.
   Using model reduction techniques within the incremental 4D-Var method.
   Dissertationsschrift, Universität Bremen, 2008.
2. D. Kubalinska.
   Optimal interpolation-based model reduction.
   Dissertationsschrift, Universität Bremen, 2008.
3. S. Meier.
   Two-scale models for reactive transport and evolving microstructure.
   Dissertationsschrift, Universität Bremen, 2008.

   Ausgezeichnet mit dem Studienpreis der unifreunde Bremen

4. J. Montalvo Urquizo.
   Simulation and Optimization of Laser Welding on Aluminium Alloys.
   Dissertationsschrift, Universität Bremen, Dr. Hut Verlag, 2008.
5. L. Prünte.
   Learning Wavelet-Dictionaries and Continuous Dictionaries.
   Dissertationsschrift, Universität Bremen, 2008.
6. Y. Tijani.
   Modeling and Simulation of Thermochemical Heat Treatment Processes: A Phase Field Calculation of Nitriding in Steel.
   Dissertationsschrift, Universität Bremen, 2008.
7. M. Wolff.
   Zur Modellierung des Materialverhaltens von Stahl unter Berücksichtigung von Phasenumwandlungen und Umwandlungsplastizität.
   Habilitationsschrift, Universität Bremen, 2008.

Sonstiges (12)

1. D. Biermann, H. Blum, A. Rademacher, M. Schäckelhoff, A. Scheidler, K. Weinert.
   Bestimmung der Materialparameter des Spindel-Schleifscheiben-Systems mittels numerischer Parameteridentifikation.
   Projektbericht, Ergebnisberichte Angewandte Mathematik, Fakultät für Mathematik, Technische Universität Dortmund, 376T, 2008.
2. B. Blume, C. Büskens.
   Verfahren zur optimierten Biomethan-Erzeugung, -Aufbereitung und Nutzung.
   Fortschrittsbericht, Zentrum für Technomathematik, Universität Bremen, Mai 2008.
3. C. Büskens, P. Kalmbach, T. Nikolayzik, D. Wassel.
   Solver Development Strategy.
   Berichte aus der Technomathematik 08-02, Universität Bremen, 2008.
4. C. Evers, K. Hachmann, M. Linden, A. Luttmann, K. Bredies, P. Maaß, F. Alexandrov.
   The Technomatika toolbox: LCMS peakpicking and alignment.
   Projektbericht, Universität Bremen, 2008.
5. L. Justen, P. Maaß.
   Verbesserte dynamische Festzieleliminierung beim Niederschlagsradar.
   Projektbericht, Universität Bremen, 2008.
6. S. Meier, A. Muntean.
   A two-scale reaction-diffusion system with micro-cell reaction concentrated on a free boundary.
   CASA Report No. 08-01, Depart. Mathematics and Computer Science, Technische Universität Eindhoven, Niederlande, 2008.
7. S. Meier, A. Muntean.
   Fas-reaction asymptotics for a two-scale reaction-diffusion system.
   CASA Report No. 08-31, Depart. Mathematics and Computer Science, Technische Universität Eindhoven, Niederlande, 2008.
8. J. Montalvo Urquizo, Z. Akbay, A. Schmidt, T. Pretorius.
   Adaptive Finite Element Models Applied to the Laser Welding Problem.
   Berichte aus der Technomathematik 08-03, Universität Bremen, 2008.
9. J. Montalvo Urquizo, A. Schmidt.
   Mathematical Optimization of Simulated Laser Welds Mathematical Optimization of Simulated Laser Welds on Aluminum Alloys.
   Berichte aus der Technomathematik 08-04, Universität Bremen, 2008.
10. L. Naujok.
    Stabilität nichtlinearer dynamischer Systeme und deren Charakterisierung durch Lyapunov-Funktionen.
    Diplomarbeit. AVM Verlag München, Universität Bremen, Dezember 2008.

    online unter: http://www.amazon.de/Stabilit%C3%A4t-nichtlinearer-dynamischer-Systeme-Lyapunov-Funktionen/dp/3863066642

11. K. Steinhorst, O. Keszöcze, F. Alexandrov.
    Mass spectrometry and wavelet approximation.
    Projektbericht, Universität Bremen, 2008.
12. D. Wassel, T. Nikolayzik, C. Büskens.
    Interface Control Document.
    Berichte aus der Technomathematik 08-01, Universität Bremen, 2008.