% This file was created by ZeTeM Website
 
% Andreas Rademacher




@INBOOK{Kumor2019_ab51f,
  author = {Dustin Kumor and Andreas Rademacher},
  chapter = {Goal-oriented  a posteriori error estimates in nearly incompressible linear elasticity},
  title = {Numerical  Mathematics and Advanced Applications, ENUMATH 2017},
  editor = {F.A. Radu and K. Kumar and I. Berre and J.M. Nordbotten and I.S. Pop},
  pages = {399-406},
  publisher = {Springer Verlag},
  year = {2019}
}


@INBOOK{Biermann2018_ffa3f,
  author = {D. Biermann and Heribert Blum and I. Iovkov and Andreas Rademacher and F.-T. Suttmeier and Korinna Rosin},
  chapter = {Modelling, Simulation and Compensation of Thermomechanically Induced Deviations in Deep-Hole Drilling with Minimum Quantity Lubrication},
  title = {Thermal Effects in Complex Machining Processes},
  editor = {D. Biermann and Ferdinand Hollmann},
  pages = {181-218},
  publisher = {Springer Verlag},
  year = {2018}
}


@INBOOK{Andres2013_dfbea,
  author = {M. Andres and Heribert Blum and Christina Brandt and C. Carstensen and Peter Maaß and Jenny Niebsch and Andreas Rademacher and Ronny Ramlau and A. Schröder and E.-P. Stephan and S. Wiedemann},
  chapter = {Adaptive finite Elements and Mathematical Optimization Methods},
  title = {Process Machine Interactions},
  editor = {Berend Denkena and Ferdinand Hollmann},
  series = {Lecture Notes in Production Engineering},
  pages = {53-77},
  publisher = {Springer Verlag},
  year = {2013},
  doi = {10.1007/978-3-642-32448-2}
}


@INBOOK{Biermann2013_2e433,
  author = {D. Biermann and Heribert Blum and Petra Wiederkehr geb. Kersting and Andreas Rademacher and H. Ludwig and S. Rausch and T. Siebrecht},
  chapter = {Surface finish of wear resistant coatings by grinding - Process, simulation and application},
  title = {6. öffentliches Kolloquium SFB 708},
  editor = {W. Tillmann},
  pages = {57-70},
  publisher = {Verlag Praxiswissen, Dortmund},
  year = {2013}
}


@INBOOK{Betz2013_d0cfc,
  author = {T. Betz and Ch. Meyer and Andreas Rademacher and Korinna Rosin},
  chapter = {Towards optimal control of elastoplastic contact problems with application to incremental rolling},
  title = {6. öffentliches Kolloquium SFB 708},
  editor = {W. Tillmann},
  pages = {167-176},
  publisher = {Verlag Praxiswissen, Dortmund},
  year = {2013}
}


@INBOOK{Schmaltz2013_44813,
  author = {S. Schmaltz and P. Landkammer and F. Beyer and Dustin Kumor and Andreas Rademacher and Heribert Blum and P. Steinmann and K. Willner},
  chapter = {Vorstellung eines Simulationsbenchmarks für die Blechmassivumformung},
  title = {2. Workshop Blechmassivumformung},
  editor = {M. Merklein and B.-A. Behrens and A. Tekkaya},
  pages = {53-68},
  publisher = {Meisenbach Verlag, Bamberg},
  year = {2013}
}


@INBOOK{Biermann2012_9f31f,
  author = {D. Biermann and Heribert Blum and Andreas Rademacher and A.V. Scheidler and K. Weinert},
  chapter = {Simulation of process machine interaction in NC-shape grinding},
  title = {Process Machine Interactions, Prediction and Manipulation of Interactions between Manufacturing Processes and Machine Tool Structures},
  editor = {Berend Denkena and Ferdinand Hollmann},
  pages = {121-142},
  publisher = {Springer Verlag},
  year = {2012}
}


@INBOOK{Blum2010_ca39b,
  author = {Heribert Blum and Andreas Rademacher},
  chapter = {Adaptive finite element discretisation of the spindle grinding wheel system},
  title = {Proceedings of the 15th Biennal Conference of the European Consortium for Mathematics in Industry},
  editor = {A. D. Fitt and J. Norbury and H. Ockendon and E. Wilson},
  pages = {499-504},
  publisher = {Springer Verlag},
  year = {2010}
}


@INBOOK{Blum2007_d3b0f,
  author = {Heribert Blum and K. Weinert and T. Jansen and T. Mohn and M. Noyen and Andreas Rademacher},
  chapter = {Verfahrensspezifische Modellbildung für die Belastung beim Schleifen},
  title = {Jahrbuch Schleifen, Honen, Läppen und Polieren},
  editor = {H.-W. Hoffmeister and Berend Denkena},
  pages = {24-38},
  publisher = {Vulkan-Verlag, Essen},
  year = {2007}
}


@ARTICLE{NganyuTanyu2023_87e66,
  author = {Derick Nganyu Tanyu and Jianfeng Ning and Tom Freudenberg and Nick Heilenkötter and Andreas Rademacher and Uwe Iben and Peter Maaß},
  title = {Deep learning methods for partial differential equations and related parameter identification problems},
  journal = {Inverse Problems},
  volume = {39},
  number = {10},
  year = {2023},
  doi = {10.1088/1361-6420/ace9d4}
}


@ARTICLE{Hinse2023_097ba,
  author = {Dominik Hinse and Magdalena Thode and Andreas Rademacher and Klaus Pantke and Christian Spura},
  title = {Numerical identification of position-dependent friction coefficients from measured displacement data in a bolt-nut connection},
  annote = {Volume 19, September 2023, 101214},
  publisher = {Elsevier},
  year = {2023},
  doi = {https://doi.org/10.1016/j.rineng.2023.101214}
}


@ARTICLE{diStolfo2019_2e8d6,
  author = {P. di Stolfo and Andreas Rademacher and A. Schröder},
  title = {Dual weighted residual error estimation for the finite cell method},
  journal = {Journal of Numerical Mathematics},
  volume = {27},
  number = {2},
  pages = {101-122},
  year = {2019}
}


@ARTICLE{Rademacher2019_bb6e0,
  author = {Andreas Rademacher},
  title = {Mesh and model adaptivity for frictional contact problems},
  journal = {Numerische Mathematik},
  volume = {142},
  number = {3},
  pages = {465-523},
  year = {2019}
}


@ARTICLE{Rademacher2018_3a18a,
  author = {Andreas Rademacher and Korinna Rosin},
  title = {Adaptive optimal control of Signorini's problem},
  journal = {Computational Optimization and Applications},
  volume = {70},
  number = {2},
  pages = {531-469},
  year = {2018}
}


@ARTICLE{Rademacher2016_721ef,
  author = {Andreas Rademacher},
  title = {NCP-function based dual weighted residual error estimators for Signorini's problem},
  journal = {SIAM Journal on Scientific Computing},
  volume = {38},
  number = {3},
  pages = {A1743-A1769},
  publisher = {SIAM},
  year = {2016},
  doi = {https://doi.org/10.1137/15M1033873}
}


@ARTICLE{Blum2016_37f3e,
  author = {Heribert Blum and Hannah Frohne and J. Frohne and Andreas Rademacher},
  title = {Semi-smooth Newton methods for mixed FEM discretizations of higher-order for frictional, elasto-plastic two-body contact problems},
  volume = {309},
  pages = {131-151},
  year = {2016}
}


@ARTICLE{Meyer2015_28456,
  author = {Ch. Meyer and Andreas Rademacher and W. Wollner},
  title = {Adaptive optimal control of the obstacle problem},
  journal = {SIAM Journal on Scientific Computing},
  volume = {37},
  number = {2},
  pages = {A918-A945},
  publisher = {SIAM},
  year = {2015}
}


@ARTICLE{Rademacher2015_027ce,
  author = {Andreas Rademacher},
  title = {Adaptive space-time finite element methods for dynamic linear thermoelasticity},
  journal = {Proceedings in Applied Mathematics and Mechanics},
  volume = {15},
  pages = {681-682},
  year = {2015}
}


@ARTICLE{Rademacher2015_9bda3,
  author = {Andreas Rademacher and A. Schröder},
  title = {Dual weighted residual error control for frictional contact problems},
  journal = {Computational Methods in Applied Mathematics},
  volume = {15},
  number = {3},
  pages = {391-413},
  year = {2015}
}


@ARTICLE{Beyer2015_c3420,
  author = {F. Beyer and Heribert Blum and Dustin Kumor and Andreas Rademacher and K. Willner and T Schneider},
  title = {Experimental and simulative investigations of tribology in sheet-bulk metal forming},
  journal = {Key Engineering Materials},
  volume = {639},
  pages = {283-290},
  year = {2015}
}


@ARTICLE{Rademacher2014_d81b5,
  author = {Andreas Rademacher and A. Schröder and Heribert Blum and H. Kleemann},
  title = {Mixed FEM of higher-order for time-dependent contact problems},
  journal = {Applied Mathematics and Computation},
  volume = {233},
  pages = {165-186},
  year = {2014}
}


@ARTICLE{Siebrecht2014_e270a,
  author = {T. Siebrecht and D. Biermann and H. Ludwig and S. Rausch and Petra Wiederkehr geb. Kersting and Heribert Blum and Andreas Rademacher},
  title = {Simulation of grinding processes using finite element analysis and geometric simulation of individual grains},
  journal = {Production Engineering, Research and Development},
  volume = {8},
  number = {3},
  pages = {345-353},
  year = {2014}
}


@ARTICLE{Biermann2013_5c61f,
  author = {D. Biermann and Heribert Blum and I. Iovkov and N. Klein and Andreas Rademacher and F.-T. Suttmeier},
  title = {Stabilization techniques and a posteriori error estimates for the obstacle problem},
  journal = {Applied Mathematical Sciences},
  volume = {7},
  number = {127},
  pages = {6329-6346},
  year = {2013}
}


@ARTICLE{Blum2012_f9cb2,
  author = {Heribert Blum and Andreas Rademacher and A. Schröder},
  title = {Goal oriented error control for frictional contact problems in metal forming},
  journal = {Key Engineering Materials},
  volume = {504},
  pages = {987-992},
  year = {2012}
}


@ARTICLE{Carstensen2012_c81a8,
  author = {C. Carstensen and D. Biermann and Heribert Blum and Andreas Rademacher and A.V. Scheidler and A. Schröder and S. Wiedemann},
  title = {Vergleich zweier Flachschleifprozesssimulationen - Beschreibung, Analyse und Kopplung mit einer Maschinensimulation},
  journal = {wt Werkstattstechnik online},
  volume = {102},
  pages = {24-26},
  year = {2012}
}


@ARTICLE{Biermann2012_44c6f,
  author = {D. Biermann and I. Iovkov and Heribert Blum and Andreas Rademacher and Korosh Taebi and F.-T. Suttmeier and N. Klein},
  title = {Wendeltiefbohren mit Minimalmengenschmierung - Experimentelle  Analyse und FE-Simulation der thermischen Werkstückbelastung},
  journal = {VDI-Z Integrierte Produktion},
  volume = {154},
  number = {4},
  pages = {62-65},
  year = {2012}
}


@ARTICLE{Schroeder2011_acf8c,
  author = {A. Schröder and Andreas Rademacher},
  title = {Goal-oriented error control in adaptive mixed FEM for Signorini's Problem},
  journal = {Computer Methods in Applied Mechanics and Engineering},
  volume = {200},
  number = {1},
  pages = {345-355},
  year = {2011}
}


@ARTICLE{Schroeder2011_1c22e,
  author = {A. Schröder and Heribert Blum and Andreas Rademacher and H. Kleemann},
  title = {Mixed FEM of higher order for contact problems with friction},
  journal = {International Journal of Numerical Analysis and Modeling},
  volume = {8},
  number = {2},
  pages = {302-323},
  year = {2011}
}


@ARTICLE{Aurich2011_dd9e9,
  author = {J.C. Aurich and D. Biermann and Heribert Blum and A. Kirsch and Andreas Rademacher and A.V. Scheidler},
  title = {Vergleich unterschiedlicher Prozesssimulationen für das Flachschleifen und ihre Kopplung mit einer Finite-Elemente-Maschinensimulation},
  journal = {Schleifen und Polieren},
  volume = {4},
  pages = {44-50},
  year = {2011}
}


@ARTICLE{Blum2009_1d52b,
  author = {Heribert Blum and Andreas Rademacher and A. Schröder},
  title = {Space adaptive finite element methods for dynamic Signorini problems},
  journal = {Computational Mechanics},
  volume = {44},
  number = {4},
  pages = {481-491},
  year = {2009}
}


@ARTICLE{Blum2008_0b885,
  author = {Heribert Blum and T. Jansen and Andreas Rademacher and K. Weinert},
  title = {Finite elements in space and time for dynamic contact problems},
  journal = {International Journal on Numerical Methods in Engineering},
  volume = {76},
  pages = {1632-1644},
  year = {2008}
}


@ARTICLE{Blum2008_14796,
  author = {Heribert Blum and Andreas Rademacher and A. Schröder},
  title = {Space adaptive finite element methods for dynamic obstacle problems},
  journal = {Electronic Transactions on Numerical Analysis},
  volume = {32},
  pages = {162-172},
  year = {2008}
}


@ARTICLE{Weinert2007_4f276,
  author = {K. Weinert and Heribert Blum and T. Jansen and Andreas Rademacher},
  title = {Simulation based optimization of the NC-shape grinding process with toroid grinding wheels},
  journal = {Production Engineering, Research and Development},
  volume = {1},
  number = {3},
  pages = {245-252},
  year = {2007}
}


@ARTICLE{Blum2006_969bc,
  author = {Heribert Blum and K. Weinert and T. Jansen and T. Mohn and Andreas Rademacher},
  title = {Angepasste Simulationstechnik zur Analyse NC-gesteuerter Formschleifprozesse},
  journal = {Zeitschrift für wirtschaftlichen Fabrikbetrieb},
  volume = {101},
  number = {6},
  pages = {422-425},
  year = {2006}
}





@CONFERENCE{Rademacher2017_94f1e,
  author = {Andreas Rademacher and Hannah Frohne},
  title = {A posteriori error estimates for nite elements of higher-order for frictional, elasto-plastic two-body contact problem},
  booktitle = {7th GACM Colloquium on Computational Mechanics, 2017},
  pages = {148-151},
  year = {2017},
  doi = {10.18419/opus-9334, 2017}
}


@CONFERENCE{Beese2016_200ea,
  author = {S. Beese and F. Beyer and Heribert Blum and K. Isik and Dustin Kumor and Andreas Rademacher and A. Tekkaya and K. Willner and P. Wriggers and S. Zeller and S. Löhnert},
  title = {Simulation of Sheet-Bulk Metal Forming Processes with Simufact.forming using User-Subroutines},
  booktitle = {ESAFORM Conference, 2016, Nantes, Frankreich},
  volume = {1769},
  number = {70004},
  year = {2016}
}


@CONFERENCE{Kuestner2016_8567f,
  author = {Ch. Küstner and F. Beyer and Dustin Kumor and A. Loderer and S. Wartzack and K. Willner and Heribert Blum and Andreas Rademacher and T. Hausotte},
  title = {Simulation-based development of pareto-optimized tailored blanks or the use within sheet-bulk metal forming},
  booktitle = {Design 2016, Dubrovnik, Kroatien},
  pages = {291-300},
  year = {2016}
}


@CONFERENCE{Biermann2015_73803,
  author = {D. Biermann and Heribert Blum and J. Frohne and I. Iovkov and Andreas Rademacher and Korinna Rosin},
  title = {Simulation of MQL deep hole drilling for predicting thermally induced workpiece deformations},
  booktitle = {Procedia CIRP},
  volume = {31},
  pages = {148-153},
  year = {2015}
}


@CONFERENCE{Biermann2012_3f01c,
  author = {D. Biermann and I. Iovkov and Heribert Blum and Andreas Rademacher and Korosh Taebi and F.-T. Suttmeier and N. Klein},
  title = {Thermal aspects in deep hole drilling of aluminium cast alloy using twist drills and MQL},
  booktitle = {Procedia CIRP},
  volume = {3},
  pages = {245-250},
  year = {2012}
}


@CONFERENCE{Rademacher2011_55a86,
  author = {Andreas Rademacher},
  title = {A Space-time adaptive finite element method for dynamic contact problems},
  booktitle = {2nd International Conference on Computational Contact Mechanics},
  pages = {109-110},
  year = {2011}
}


@CONFERENCE{Biermann2010_238e9,
  author = {D. Biermann and Heribert Blum and Andreas Rademacher and A.V. Scheidler},
  title = {Simulation of thermal effects in NC-shape grinding of free formed surfaces using toroid grinding wheels. Part I: Experimental results},
  booktitle = {CIRP 2nd International Conference Process Machine Interactions, Vancouver, Kanada},
  year = {2010}
}


@CONFERENCE{Biermann2010_021ce,
  author = {D. Biermann and Heribert Blum and Andreas Rademacher and A.V. Scheidler},
  title = {Simulation of thermal effects in NC-shape grinding of free formed surfaces using toroid grinding wheels. Part II: Modeling and FE-discretization},
  booktitle = {CIRP 2nd International Conference Process Machine Interactions, Vancouver, Kanada},
  year = {2010}
}


@CONFERENCE{Biermann2008_92226,
  author = {D. Biermann and Heribert Blum and T. Jansen and Andreas Rademacher and A.V. Scheidler and K. Weinert},
  title = {Experimental analyses to develop models for NC-shape grinding with a toroid grinding wheel},
  booktitle = {1st CIRP International Conference on Process Machine Interactions (PMI), Produktionstechnisches Zentrum, Garbsen},
  pages = {279-288},
  year = {2008}
}


@CONFERENCE{Biermann2008_8d110,
  author = {D. Biermann and Heribert Blum and T. Jansen and Andreas Rademacher and A.V. Scheidler and A. Schröder and K. Weinert},
  title = {Space adaptive finite element methods for dynamic Signorini problems in the simulation of the NC-shape grinding process},
  booktitle = {1st CIRP International Conference on Process Machine Interactions (PMI), Produktionstechnisches Zentrum, Garbsen},
  pages = {309-316},
  year = {2008}
}


@MISC{Kumor2019_1cc1d,
  author = {Dustin Kumor and Andreas Rademacher},
  title = {Goal oriented a posteriori error estimators for problems with modified discrete formulations based on the dual weighted residual method},
  note = {Ergebnisberichte Angewandte Mathematik, Fakultät für Mathematik, Technische Universität Dortmund, 596},
  howpublished = {Projektbericht},
  year = {2019}
}


@MISC{Rademacher2015_19a2f,
  author = {Andreas Rademacher},
  title = {A numerical study on continuous space-time finite element methods for dynamic Signorini problems},
  note = {Ergebnisberichte Angewandte Mathematik, Fakultät für Mathematik, Technische Universität Dortmund, 517},
  howpublished = {Projektbericht},
  year = {2015}
}


@MISC{Rademacher2015_e5946,
  author = {Andreas Rademacher},
  title = {Balancing discretization and numerical error for coupled parabolic hyperbolic problems using the dual weighted residual method with application to thermoelasticity},
  note = {Ergebnisberichte Angewandte Mathematik, Fakultät für Mathematik, Technische Universität Dortmund, 516},
  howpublished = {Projektbericht},
  year = {2015}
}


@MISC{Betz2014_ab925,
  author = {T. Betz and Ch. Meyer and Andreas Rademacher and Korinna Rosin},
  title = {Adaptive optimal control of elastoplastic contact problems},
  note = {Ergebnisberichte Angewandte Mathematik, Fakultät für Mathematik, Technische Universität Dortmund, 496},
  howpublished = {Projektbericht},
  year = {2014}
}


@MISC{Rademacher2011_94f94,
  author = {Andreas Rademacher},
  title = {Space-time finite element methods for dynamic frictional contact problems},
  note = {Ergebnisberichte Angewandte Mathematik, Fakultät für Mathematik, Technische Universität Dortmund, 432},
  howpublished = {Projektbericht},
  year = {2011}
}


@MISC{Blum2009_2545f,
  author = {Heribert Blum and H. Kleemann and Andreas Rademacher and A. Schröder},
  title = {On solving frictional contact problems. Part III: Unilateral contact},
  note = {Ergebnisberichte Angewandte Mathematik, Fakultät für Mathematik, Technische Universität Dortmund, 379},
  howpublished = {Projektbericht},
  year = {2009}
}


@MISC{Biermann2008_88572,
  author = {D. Biermann and Heribert Blum and Andreas Rademacher and M. Schäckelhoff and A.V. Scheidler and K. Weinert},
  title = {Bestimmung der Materialparameter des Spindel-Schleifscheiben-Systems mittels numerischer Parameteridentifikation},
  note = {Ergebnisberichte Angewandte Mathematik, Fakultät für Mathematik, Technische Universität Dortmund, 376T},
  howpublished = {Projektbericht},
  year = {2008}
}